MH20 Manual system probe
About MH20
MH20 is a manually adjustable probe head with an integral
TP20 kinematic stylus module mount.
The A-axis rotates through 315° in the X-Y plane. The B-axis rotates through 93° in the Z plane. A thumbwheel locks the swivel in any position within the movement envelope of the head.
Qualification must take place after each head adjustment, but TP20 modules can be changed repeatably, provided qualification has already taken place and the head has not been re-adjusted.
Top
MH20 specification
| Specification | |
|---|---|
| Length | 731 mm |
| Diameter | 31.5 mm |
| Weight | 100 g |
| Probe mounting | TP20 kinematic mount |
| Head mounting | MS/T range of shanks |
| Suitable interface | PI 4-2 |
| No. of probe sockets | 1 |
| Probe status indication | 1 LED |
| Cable connection | 5 pin DIN 180º socket |
| A-axis indexing | Non-indexing swivel ±93° |
| B-axis indexing | Non-indexing swivel ±300° |
| Maximum extension bar | EM2 extension module - 75 mm (2.95 in) |
Top
Marketing literature
-
Brochure: MH20 and MH20i Manual probe heads with modular flexibility
[467kB] Brochure: MH20 and MH20i Manual probe heads with modular flexibility
Top
Downloads
-
User's guide: MH20 and MH20i
[530kB] Installation and users guide: MH20 and MH20i manual heads with TP20 probe module
-
Data sheet: MH20 and MH20i
[1.3MB] MH20 and MH20i data sheet